|
Usuarios conectados
Actualmente hay 5962 visitantes y 1 usuarios online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
2-4
Setting the Clock 8 Press ENTER to start the �AUTO� clock
Example: To set the clock to 2:30 p.m. on
PREPARATION
Reference Information
set feature.
Initial Settings Using On-screen Display
The language selection and clock setting must be set when VCR is first plugged in or after it August 25 (summer time) 2001. After the VCR is turned off, it automatically encounters a power failure. updates clock using the data broadcast
1
The MENU screen appears on the TV. broadcasting
Preparation Press PROG.. by the local TV stations. � Turn on TV, and select channel (3 4), or video input mode if you made the Audio/Video *The clock is connection (page 11). revised by Press to set remote control operating the VCR. � VCR Select �PRESET� using FF or REW, CLOCK SET
2
and press ENTER. signal at 8:00 A.M TIME ZOnE CH
Setting the Language
every morning. 2 VCR
CLOCK SET CH MEMORY
SUMMER TIME
VCR TV POWER
SCAnnInG nOW
1 2 3
Press POWER to turn on the VCR.
1 2 Press PROG..
REW FF
E n D : PROG ENTER
POWER
4 5 6
PREPARATION
7 8 9
0 100
Select the options using FF or REW. The following screen appears on the TV.
9
VC-413
Change the data using PLAY or STOP.
EJECT
EnD : PROG ENTER
PLAY
REW F
ENTER
STOP
PLAY, STOP
DISPLAY COUNTER RESET SP/ SLP
REMAIN/ COUNT
1) Set �SUMMER TIME (Daylight-Saving Time)�. Press ENTER to select �CLOCK SET�. 3
CLOCK SET to 3:00 AM (forward one hour). PROG. SUMMER TIME DST end: Daylight-saving time ends on
P S n T E R
SLOW PAUSE/STILL
ENTER DST start: Daylight-saving time begins on
first Sunday in April. Because the clock automatically changes from 2:00 AM
I.SELECT REC TIMER
TV VOL PROG. CANCEL
Select the language using PLAY or 3 TIME ZOnE CH the last Sunday in October. The VCR STOP and press PROG.. clock automatically changes from 2:00 AM MEnU
to 1:00 AM (back one hour).
E n D : PROG ENTER
remember that any part of a scheduled
The screen turns to the MENU screen. O A R S E T I n G Timer Recording that falls between these two times will not be recorded. Select �AUTO� �MANU� using PLAY or AUTO: VCR is using the clock data STOP.
4
EnD : PROG ENTER
Broadcast by the local TV stations.
If Press PROG. return to the normal TV screen. you select �AUTO� mode, proceed to step 8. Daylight-saving time.
AUTO: The VCR automatically sets or IN: You want to use the DST function, and adjusts the clock. you are leaving in the area that apply MANU: You can set the clock manually. OUT: You are not leaving in the area that If select �MANU� mode, proceed to next apply Daylight-saving time and you do not step. want to use DST function.
4
Optional settings on the SET UP screen If you select �AUTO� for your time zone,
2) Set �TIME ZONE�. 5 Vary digits to set the hour.
PLAY : To increase.
Other optional settings can be made. Press ENTER while �SET UP� is selected on the MENU screen. VCR sets clock using the first STOP : To decrease.
6
(To move back, press REW.)
Coordinated Universal Time information it The screen turns to the SET UP screen. finds. If the time is not correct, select Move to the next using FF another time zone or use the �MANU� option.
COUnTER MEM on off
7
Page 22 TAPE LEnGTH 120 160 180 3) Set �CLOCK DATA CH�. Page 23 Repeat step 5 and 6 to set the minutes, If you don't know the clock data channel, To change language, move down here and set to the desired one. LAnGUAGE EnG FRA ESP month, day, and year (by the last
select �AUTO�. The VCR will scan
two digits). automatically to tune the channel carrying E n D : PROG
If AUTO CLOCK SET is unsuccessful, set the set menu selection.
the clock data. Proceed step 10 to start the clock.
To exit, press PROG. once. time and date through the �MANU� clock
10 Press PROG..
Now the clock starts.
14 15
Toshiba
|
|
|
> |
|