PIONEER VSX-D710S
Manual de Servicio

VSX-D710S

6 2 /DTS button Use to put the receiver in DOLBY DIGITAL, DOLBY SURROUND and DTS modes. To use first press the RCV button then operate this button. DSP button Use to put receiver in one of the DSP modes. To use first press the RCV button then operate this button. TEST TONE button Use to sound the TEST TONE when setting up the surround sound of the receiver (the 2 /DTS mode must be on). To use first press the RCV button then operate this button. SIGNAL SELECT Use to select the proper signal (analog, digital) for the source your are inputting. 7 CH SELECT button Use to select a speaker when setting up the surround sound of the receiver. CH LEVEL +/� Use to set up the levels of the surround sound of the receiver. FUNCTION button Use to select the playback or recording source. This button lets you cycle through the different functions of the receiver in the following order: CD, TUNER, AUX, CDR/ TAPE, VCR/DVR, DVD/LD, VIDEO, and TV/SAT. 8 LOUDNESS button Use to switch on the loudness. This feature is useful for getting good bass and treble sounds listening at low volumes. FL DIMMER button Use this button to make the fluorescent display (FL) dimmer or brighter. There are three brightness settings as well as an off setting. SETUP button Use this button when setting up the remote control to control other components. MUTING button Use to mute the sound or restore the sound if it has been muted. 9 THE FOLLOWING BUTTONS ARE DEDICATED TV CONTROL BUTTONS. THEY ARE ONLY USED FOR CONTROLLING YOUR TV. TV FUNC button Use to select the TV function. TV button Use to turn on/off the power of the TV. TV VOLUME +/� buttons Use to adjust the volume on your TV. 0 MENU button Use to access different menus associated with your DVD player. To use first press the DVD button then operate this button. - MASTER VOLUME +/� buttons Use to set the overall listening volume. = CHANNEL +/� buttons Use to skip tracks backward or forward on CDs, DVDs, etc and change channels on the VCR, DVR, etc.

~ @ # % � ( TUNE/ST +/�) & ENTER buttons Use these arrow buttons when setting up your surround sound system. These buttons are also used to control DVD menus/options and for deck 1 of a double cassette deck player. The TUNE/ST +/� buttons can be used to find radio frequencies and preset stations, respectively . ! DISC button Use to select a disc and a multi-CD player. To use first press the CD button then operate this button. @ RECEIVER (POWER) button This switches between STANDBY mode and power ON for this receiver. # LED DISPLAY This display flashes when a command is sent from the remote control to the receiver. It also flashes at other times, for example when teaching the receiver preset codes, with specific meanings.

59