Inicio >>
PIONEER >>
S-W100S/MLXMA/E Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
S-W100S
6. ADJUSTMENT
There is no information to be shown in this chapter.
7. GENERAL INFORMATION
7.1 DISASSEMBLY
Grill ASSY
Slit
¶ GRILL ASSY SECTION
Remove the Grill Assy. Insert a screwdriver into the slit under the Grill Assy to pry open the front grill gradually and uniformly. Remove 3 (AC and Signal) connectors from the CONT ASSY .
2
JACK Assy
3 3 A 4 5
1
Speaker
2
¶ REAR COVER SECTION
Remove 6 screws (1) from the Rear Cover.
¶ JACK ASSY SECTION
1
Remove 6 screws (2) from the JACK Assy. Remove the A connector from the CONT Assy .
¶ SPEAKER SECTION
5
Remove the Rear Cover. Each speaker is attached to the Back board by 4 external screws (3). detach it, unfasten those screws. When attaching it, face its terminal upward.
Rear Cover
6
¶ POWER ASSY SECTION
Remove the Rear Cover. Remove 6 screws (5) from the Back board. Remove the 6 connector from the POWER Assy .