No hay comentarios de productos.
Basic playback POWER OPEN/CLOSE To obtain a higher quality picture
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.
2, 4 3
Power indicator
PAUSE/STEP PLAY STOP ENTER
Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this unit, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs.
E
About
DVD
VCD
CD
4 5
DVD VCD CD
C/D/B/A
The DVD VCD CD icons on the heading bar show the playable discs for the function described under that heading. DVD : You can use this function with DVD video discs. VCD : You can use this function with Video CDs. CD : You can use this function with Audio CDs and CD-R/RW CDs.
Basic playback
To pause playback (still mode)
Press PAUSE/STEP during playback.
PAUSE/STEP
Preparations: � When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD. This may include video or component video inputs which are exclusive to DVD playback. � When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD.
To remove the disc
Press OPEN/CLOSE.
OPEN/CLOSE
To resume normal playback, press PLAY.
� The sound is muted during still mode.
Remove the disc after the disc tray opens completely.
1
Press ON/STANDBY (I /
The DVD turns on and the Power indicator lights.
).
4
Press OPEN/CLOSE or PLAY on the unit.
�Reading� display will change to �No Disc�. (If DVD disc has already loaded, playback will start automatically.)
No Disc
OR
The disc tray closes automatically. On the TV-screen, � � changes to �Reading� and then playback commences.
Reading
To stop playback
Press STOP.
STOP
Be sure to press OPEN/CLOSE to close the disc tray after you remove the disc.
Press OPEN/CLOSE.
� A menu screen will appear on the TV screen, if the disc has a menu feature. Press C/D or B/A to select title, then press ENTER. Title is selected and play commences.
Screen saver function
The screen saver operates when you leave the unit in DVD stop mode for approx. five minutes. The screen will repeatedly get dark gradually and back to normal.
Notes: � If a non-compatible disc is loaded, �Incorrect Disc�, �Region Code Error� or �Parental Error� will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 6 and 34). � Some discs may take a minute or so to start playback. � When you set a single-faced disc label downwards (ie. the wrong way up) and press the OPEN/CLOSE button or the PLAY button on the unit, �Reading� will appear on the display for 30 seconds and then �Incorrect Disc� will continue to be displayed. � Some discs may not work the resuming facility. � Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 26. � Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs. � Do not move the unit during playback. Doing so may damage the disc. � Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the unit to malfunction. � Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to malfunction. � In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the ON/STANDBY (I / ) button on your remote control once the movie is completed. � There may be a slight delay between you pressing the button and the function activating.
2
The disc tray opens.
5
Press STOP to end playback.
Resuming facility � The unit records the stopped point, depending on the disc. � � appears on the screen. Press PLAY to resume playback (from the scene point). � If you press STOP again or unload the disc (� � appears on the screen.), the unit will clear the stopped point.
3
Place the disc on the disc tray. With the playback side down
To start playback in the stop mode
Press PLAY.
� There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD to malfunction. � Do not place a disc which is unplayable in this DVD.
16
17
Basic playback
Advanced playback DISPLAY
Playing a disc (continued)
You can play discs at various speeds.
SLOW
/
Zooming/Locating desired scene
0�9 SEARCH (JUMP) ZOOM CLEAR (CANCEL) ENTER C/D/B/A
E
PAUSE/STEP REV PLAY FWD SKIP
/
DVD VCD CD
Playing in fast reverse or fast forward directions
To resume normal playback
Press PLAY.
PLAY
DVD VCD
Zooming
DVD VCD CD
Locating desired scene
Press REV or FWD during playback. REV: Fast reverse playback FWD: Fast forward playback Each time you press the REV or FWD button, the playback speed changes.
This unit will allow you to zoom in on the frame image. You Use the title, chapter and time recorded on the disc to locate can then make selections by switching the position of the the desired point to play back. frame. To check the title, chapter and time, press DISPLAY.
4-8
.9,
1
Notes: � The DVD video player mutes sound and subtitles during reverse and forward scan of DVD/VCD video discs. However, this unit plays sound during fast forward or fast reverse play of audio CDs. � The playback speed may differ depending on the disc.
Press ZOOM during playback.
1
2 (x 1.5) 2 (x 1.5) 3 (x 2.0) 3 (x 2.0)
Press SEARCH (JUMP) during playback or stop mode.
SEARCH (JUMP)
ZOOM
The centre part of the image will be zoomed in. Each press of ZOOM will change the ZOOM as follows.
DVD Video CD/ JPEG CD 1 (x 1.3) 1 (x 1.3)
Jump
Time Title Chapter
T
/Enter/0
9/Cancel/Jump
DVD VCD
Playing frame by frame
To resume normal playback
Press PLAY.
PLAY
2
�Chapter�.
Press C or D to select the �Time�, �Title� or
Press PAUSE/STEP during still playback. Each time you press the PAUSE/
PAUSE/STEP
1
ENTER
Jump
Time Title Chapter
STEP button, the picture advances one frame.
/Enter/0
9/Cancel/Jump
Note: The sound is muted during frame by frame playback.
DVD VCD
Playing in slow-motion
To resume normal playback
) Reverse Press PLAY.
PLAY
Note: In case of the Video CD recorded with PAL colour system, 3 (x 2.0) zooming does not work.
3
Press Number buttons (0�9) to change the number.
" % # & ! $ '
Jump Time Title Chapter /Enter/0 9/Cancel/Jump 12
Press SLOW ( ) Forward or SLOW ( during playback.
2
Press C/D/B/A to view a different part of the DBA frame. You may move the frame from the centre position to UP, DOWN, LEFT or RIGHT direction.
SLOW
Each time you press the button, the slow-motion speed changes.
Notes: � The sound is muted during slow-motion playback. � The Video CD can not play Reverse Slow.
ENTER
DVD VCD CD
� If you input a wrong number, press CLEAR (CANCEL). � Refer to the package supplied with the disc to check the numbers.
Locating a chapter or track
In the zoom mode press ZOOM repeatedly to
4
Press ENTER. Playback starts. � When you change the title, playback starts from Chapter 1 � of the selected title. work in the Some discs may not above operation.
3
Press SKIP
SKIP
return to a 1:1 view (
Off).
or
repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track. To locate succeeding chapters or tracks.
SKIP
ZOOM
Playback starts from the beginning of the current chapter or track. When you press twice in quick successions, playback starts from the beginning of the preceding chapter or track.
ENTER
Notes: � You can select the Pause, Slow or Search playback in the zoom mode. � Some discs may not respond to zoom feature. Note: In case of the Video CD playback with PBC, the Search (Jump) function does not work. To turn off PBC, see page 26 .
Notes: � A �Prohibition� symbol may appear at the upper left of the screen. This symbol means either the feature you tried is not available on the disc, or the DVD can not access the feature at this time. This does not indicate a problem with the DVD. � The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen. Projection televisions are very susceptible.
18
19
