|
No hay comentarios de productos.
3.1.8 REMOVING THE POWER PWB � Remove the STAND. � Remove the REAR COVER. � Remove the FAN BRACKET. � Remove the POWER CORD. � Remove the RECEIVER PWB. (1) Remove the 4 screws [X], and remove the AV JACK BRACKET. (2) Remove the 6 screws [Y], and remove the POWER PWB. (3) Remove the 6 screws [Z], and remove the CHASSIS BASE.
Y
Y
POWER PWB
P Q
AV JACK BRACKET
Z
CHASSIS BASE
X
Z
Fig.3-1-8 3.1.9 REMOVING THE SPEAKER � Remove the STAND. � Remove the REAR COVER. � Remove the POWER CORD. (1) Remove the 5 screws [a], and remove the SPEAKER BOX.
a
SPEAKER BOX
a
Fig.3-1-9A (2) Remove the 4 screws [b], and remove the SPEAKER (L / R). (3) Remove the 4 screws [c], and remove the DUCT COVER/ DUCT BASE. NOTE: Since the speaker is attached in a certain direction, attach the speaker in the same correct direction as it has been attached.
SPEAKER(L)
b
DUCT BASE/DUCT COVER
c
c
b
SPEAKER(R)
Fig.3-1-9B
(No.YA003)1-15
|
