Check if the CN706 is OK. Check if the CN706 is OK. N o Check Power Supply Circuit. Yes Check if the ATAPI Cable is normally. Check if the ATAPI Cable is normally. N o Reconnect it. Yes Check if the PN301 PINS(1)(2)(3)(4) is OK. N o Yes Yes
N o Check POWER SUPPLY circuit.
N o Reconnect it.
Check if the PN302 PINS(1)(2)(5)(6) level is OK.
N o
Check if the IC302 PINS(1)(26) is OK. Check if the IC302 PINS(1)(23) is OK. N o Yes Yes
N o
Yes Yes
Check if the IC102 PINS(17)(18) is OK.
N o
Refer to PICK-UP Unit or Replace DECK MECHA DVD.
Refer to IC302(BA5954FN) or Replace DECK MECHA DVD.
Refer to IC102(MT1388). Replace DECK MECHA DVD.
Yes
Refer to IC302(BA5954FN) or Replace DECK MECHA DVD. Check if the PN302 PIN(3) is OK. N o
Check PATTERN Open or Short.
Replace DECK MECHA DVD.
Check if the IC102 PIN165 is OK. Yes Yes Refer to IC102 (MT1388) or Replace DECK MECHA DVD. Check PATTERN Open or Short.
N o
VIDEO OUT Abnormal
Check if the PN401 is normally. Refer to IC102 (MT1388) or replace DECK MECHA DVD. Yes
N o Reconnect it.
Check if the IC410 PINS(39)(40)(43)(44)(47) (48) is OK.
N o
Check if the IC410 PIN(1) to (8) is OK. Yes N o Check DECK MECHA DVD or MPEG PCB.