SONY KVTF21P50
Manual de Servicio

The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual.

SECTION 1-2 GENERAL (except KV-PF21P40)
Using Your New TV

WARNING
� Dangerously high voltages are present inside the TV. � Operate the TV only between 220 � 240 V AC.

Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the �Connecting a VCR� diagram below.

Do not open the cabinet and the rear cover of the TV. Refer servicing to qualified personnel.

Install the TV in a stable position. Do not allow children to climb onto it.

Rear of TV

IEC connector (not supplied)

� 19 �
To prevent fire or shock hazard, do not expose the TV to rain or moisture. Do not operate the TV if any liquid or solid object falls into it. Have it checked immediately by qualified personnel only.

Antenna cable (not supplied)

or
: Signal flow

Connecting a VCR
To watch the video, press �
Do not install the TV in a confined space, such as a bookcase or built-in cabinet. Do not block the ventilation openings of the TV. Clean the TV with a dry and soft cloth. Do not use benzine, thinner, or any other chemicals to clean the TV. Do not scratch the picture tube.

(see page 12).

Rear of TV

Antenna cable (not supplied) To antenna output

VCR To � (antenna)

KV-PF21P40/TF21M60/TF21P50

Do not pull the power cord to disconnect the TV. Pull it out by the plug.

Do not plug in too many appliances to the same power socket. Do not damage the power cord.
AUDIO VIDEO

L(MONO)

R
VIDEO IN VIDEO OUT

L

1

To video and audio outputs
Disconnect the power cord during lightning storms or if you are not going to use the TV for several days.

To � 1 (video input) Audio/Video cable (not supplied) (yellow) -L (MONO) (white) -R (red)

Do not install the TV in hot, humid or excessively dusty places.

: Signal flow

2

4

Using Your New TV

RM-952