2-1-1. Attachment/Removal of the DSBK-210
Attaching 1. Loosen the three screws, and slide the top cover of the DSR-2000/2000P away from the top retainer and blank panel. 2. Loosen the screw, then raise the board retainer and pull it out from the board retainer guide.
B4 x 6 Fixing screws (with stopper)
4. Pass the harness through the opening in which the connector panel fits and connect it to the two connectors of the connector panel ; then fasten the connector panel to the DSR-2000/2000P with the screw.
Harness
Connector panel Screw B3 x 6 Board retainer B3 x 6 (with stopper) Board retainer guides Blank panel Top retainer DIF-109B board
5. Connect the harness to connectors CN200 and CN201 on the DIF-109B board on the IF-821 board. (Both connectors output the same signals.)
