53862-gb.fm5 Page 41 Monday, March 19, 2001 10:25 AM
ELECTRICAL CONNECTION
� Warning: Do not connect to the power supply before you have finished connecting the oven. Make sure the oven is installed and connected to the electricity supply by a qualified technician in accordance with the manufacturer�s instructions and in compliance with local regulations. The installer is responsible for the correct electrical connection of the oven and the observance of the relative safety regulations. The oven must be connected to the electricity supply by means of an all-pole disconnect switch with minimum contact gap of 3 mm. The oven must be earthed by law. Do not use multiple plug adapters or extension leads. After the oven has been installed, the electrical components must be inaccessible. Make sure that the voltage shown on the rating plate is the same as the power supply voltage in your home. The rating plate is on the front edge of the oven cavity (visible with oven door open).
