7gb14811.fm Page 12 Tuesday, November 5, 2002 12:58 PM
Adjust the feet Small unevennesses in the floor can be compensated for by screwing the four appliance feet up or down (never use pieces of wood, cardboard or similar material): 1.The washing machine must be installed horizontally in width and depth. Use a spirit level. 2.Loosen the locknut clockwise using the wrench provided. 3.Adjust the height of the foot by hand. 4.Tighten the locknut anti-clockwise to the washing machine. If the appliance is to be installed on a wooden floor, distribute the weight by placing it on a 70 x 80 cm sheet of plywood at least 3 cm in thickness. Screw the plywood sheet to the floor.
