SECTION 3 ASSEMBLY OF MECHANISM DECK
Note : Follow the assembly procedure in the numerical order given.
3-1. HOUSING
5 Fit projection on C part. 2 Install the hanger onto two claws of the housing. 4 Fit claw on B part. 7 Holder the hanger by bending the claw. 1 Install the catcher to the hanger.
hanger
3 Put the housing under A part.
6 Fit projection on D part.
housing
C part 8 Hold the hanger by bending the claw.
D part
A part
B part
3-2. ARM (SUCTION)
2 Move the arm (suction) in the arrow Direction and fit on projection.
