|
Usuarios conectados
Actualmente hay 5774 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Radio
Memorizing stations automatically
� Best Tuning Memory (BTM)
The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, AM1, and AM2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents.
Memorizing only the desired stations
You can store up to 6 stations on each band in the order of your choice.
1 2 3 4
Press (SOURCE) repeatedly to select the tuner. Press (MODE) repeatedly to select the band (FM1, FM2, AM1, or AM2). Press either side of (SEEK/AMS) to tune in the station you want to store on the number button. Press and hold the desired number button ((1) to (6)) until �PRESET� appears. The number button indication appears in the display.
1
Press (SOURCE) repeatedly to select the tuner. Each time you press (SOURCE), the source changes as follows:
B CD B TAPE B TUNER
2
Press (MODE) repeatedly to select the band. Each time you press (MODE), the band changes as follows:
B FM1 B FM2 B AM1
Note If you try to store another station on the same number button, the previously stored station will be erased.
B AM2
Receiving the memorized stations
1 2 3
Press the number button ((1) to (6)) momentarily where the desired station is stored. Press (SOURCE) repeatedly to select the tuner. Press (MODE) repeatedly to select the band (FM1, FM2, AM1, or AM2).
3
Press (SENS/BTM) for two seconds. The unit stores stations in the order of their frequencies on the number buttons. A beep sounds when the setting is stored.
Notes � The unit does not store stations with weak signals. If only a few stations are received, some number buttons will retain their former setting. � When a number is indicated in the display, the unit starts storing stations from the one currently displayed.
If you cannot tune in a preset station
Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.
10
|
|
|
> |
|