7.1.1 DISASSEMBLY
- Removing the Grille Assy (Fig.1)
1
Remove the two screws and then remove the Holder. Disconnect the connector. Remove the two screws and then remove the Grille Assy.
5
5
2
B
3 4 3 3
- Removing the Case
3 4 5
C
Remove the five screws.(Fig.1)
Remove the screw.(Fig.1)
Remove the two screws and then remove the Case.(Fig.1)
3 2
1
1
3 2
Note) Inside the product there is a flexible substrate that connects the Case and the Bracket. Be very careful and do not give it a strong pull when removing the Case, otherwise it may be torn.
Case
Holder
Grille Assy
Fig.1
6
D
Remove the four screws. (Fig.2)
Disconnect the connector and then remove the Bracket. (Fig.2) Remove the Case.(Fig.1)
