PIONEER XV-MF5/WLXJ
Manual de Servicio

5

6

7

8

6.5 MECHANISM ADJUSTMENT
A

1 Tangential and Radial Height Coarse Adjustment START
� Remove the 06SD Pickup Assy from the Traverse Mechanism Assy-S. � Remove the joint and the joint spring of the 06SD Pickup Assy.

06SD Pickup Assy

Joint VK1B
Note: Before removing the flexible cable for the pickup, soldering of the pickup circuit is necessary. For details, see "7.1.14 DISASSEMBLY".

Joint spring VK1 Hold spring

B

� Pass through the guide shaft to a new 06SD Pickup Assy. � Attach it to the Traverse Mechanism Assy-S.

06SD Pickup Assy
C

Guide Shaft

D

� Put the joint between the Tangential (or Radial) adjustment screw and the mechanism base and turn each screw to adjust the height. (Refer to "6.1 ADJUSTMENT ITEMS AND LOCATION".)

Joint

7.5mm Mechanism base
E

� Attach the Traverse Mechanism Assy-S to the 06 LOADER Assy. � Turn it over and attach the joint and the joint spring. � Arrange the flexible cables. (Refer to "7.1.14 DISASSEMBLY".)

F

XV-MF5
5 6 7 8

71