SPECIFICATION
Power Output Signal-to-Noise Ratio Maximum Power Output Load Impedance Frequency Response Input Sensitivity/Impedance Distortion Power Requirement Grounding system Dimensions (W/H/D) Mass (approx.) 100 W RMS � 4 channels at 4 � and [ < or = ] 1% THD + N 80 dBA (reference: 1 W into 4 �) 800 W 4 � (2 � to 8 � allowance) 4 � (4 � to 8 � allowance) (Bridge mode) 5 Hz to 50,000 Hz ( +0, -3 dB) 1 V/20 k� (0.3 V to 6 V, variable) Less than 0.004% (at 1 kHz) DC 14.4 V (11 V to 16 V allowance) Negative ground 400 mm � 264 mm � 63 mm (15-3/4 in. � 10-7/16 in. � 2-1/2 in.) 5.7 kg (12.6 lbs.)
Design and specifi cations are subject to change without notice.
SECTION 1 PRECAUTION
1.1 Safety Precautions
!
Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system.
SECTION 2 SPECIFIC SERVICE INSTRUCTIONS This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
