JVC XL-MV7000GDUS
Manual de Usuario

BEFORE USING FOR THE FIRST TIME
Basic connections

The Video CD player must be connected directly to a television set or, an amplifier or receiver that is connected to a television or monitor. Select a level, dry location free of dust and vibration, having a temperature maintained between 5 and 35°C (41 and 95°F).

Connecting the player to an amplifier/ receiver equipped with the analog discrete inputs
Connect the player�s 5-channel outputs (AUDIO OUT FRONT-RIGHT/ LEFT, AUDIO OUT SURROUND-RIGHT/LEFT, and AUDIO OUT CENTER) to the analog discrete inputs of an amplifier/receiver using audio cables, while the VIDEO OUT to the television�s video input terminal using the yellow plugs of the supplied Audio Video cable. Be sure to connect correctly between corresponding terminals.
To input FRONT jack of the amplifier/receiver

Connecting the player to a TV or amplifier/receiver using the Audio Video cable
First make the audio and video connections before connecting the AC power cord. Also, make sure that the equipment (television, amplifier or receiver) to be connected with the player is turned off. Firmly insert the yellow pin plug of the Audio Video cable in the yellow VIDEO OUT jack on the rear panel of the player; the red pin plug in the red AUDIO OUT FRONT (RIGHT) jack; and the white pin plug in the white AUDIO OUT FRONT (LEFT) jack. (The RIGHT and LEFT output jacks are for the right and left audio channels.) Then firmly insert the pin plugs at the other end of the Audio Video cable into the matching video and audio INPUT jacks. If your television set has an S-video input, we recommend you to connect it with S-VIDEO OUT of the player using the optional S-Video cable, in addition to the (standard) video connection, to get a better picture quality.

AV COMPU LINK

To input audio jack of the television/amplifier/ receiver

To input REAR jack of the amplifier/receiver

Audio cable (optional)

Audio cable (optional)
To input CENTER jack of the amplifier/receiver

Audio Video cable (supplied)

Video out select
Audio Video cable (supplied)
To input video jack of the television/amplifier/receiver
VIDEO OUT SELECT
AV COMPU LINK

Set the VIDEO OUT SELECT switch on the rear panel to NTSC, PAL, or MULTI mode according to your television system. NTSC .................... for NTSC exclusive TV PAL ....................... for PAL exclusive TV MULTI ................... for Multisystem TV

To input S-Video jack of the television/amplifier/receiver

S-Video cable (optional)

Note � Set the switch before turning the power on. If you change the switch position while the power is on, the new setting does not become effective until you turn the power to standby and then on.

Page 2