|
|
|
Usuarios conectados
Actualmente hay 6043 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
2-1-3. Removal of CN-1620 Board
1. Remove the two screws a (P2 x 12) and b (P2.6 x 8), and remove the camera cover (R). 2. Disconnect the four connectors (CN31, CN32, CN33, CN34) on the CN-1620 board. 3. Remove the two screws c (P2 x 6), and remove the CN-1620 board.
Screw c (P2 x 6) CN34 CN33 Claws CN31 Screw c (P2 x 6) CN32 CN-1620 board Claws Screws b (P2.6 x 8) Screw a (P2 x 12)
2-1-5. Removal of PS-515 Board
1. Remove the cover assembly. (Refer to section 2-1-1.) 2. Remove the AC-193 board. (Refer to section 2-1-2.) 3. Disconnect the five connectors (CN12, CN13, CN14, CN15 and CN16) on the PS-515 board, and remove the PS-515 board. 4. Remove the four screws (P3 x 4), and remove the PS515 board.
Screw (P3 x 4) CN13 CN14 Screw (P3 x 4) CN15 CN12 Screw (P3 x 4)
PS-515 board CN16 Screw (P3 x 4)
Screw a (P2 x 12)
Camera cover (R)
2-1-4. Removal of CN-1621 Board
1. Remove the cover assembly. (Refer to section 2-1-1.) 2. Disconnect the connector (CN53) on the CN-1621 Board. 3. Remove the two screws (P3 x 12), and remove the CN1621 board.
CN53 CN-1621 board
Screws (P3 x 12)
2-2
VID-P50
|
|
|
> |
|
