PANASONIC RRXR320
Manual de Usuario

Recording
ªChecking the remaining recording time Press [MODE] while recording. Press again to return to the Remaining previous display. recording time The above display is shown automatically when the remaining recording time becomes very short. Press [MODE] to show the recording time in this case. ªChecking the remaining memory on the card While the unit is stopped, press and hold [STOP] for 2 seconds. The meter reduces from right to left as the remaining memory reduces.

Changing microphone sensitivity
1To select Push up or down 2To confirm selection Press
Memory meter

Using the voice activating system to prevent unnecessary recording
The digital voice activating system (VAS) pauses recording during periods of silence and so prevents recording unnecessarily. VAS works better when microphone sensitivity is set to �LOW�.

You can set sensitivity to high (to record relatively softer sounds) or low (to record only relatively louder sounds) to suit the circumstances. The recording level meter can help you determine which level is needed. The sensitivity also works if you have connected external microphone. This example shows how to set sensitivity to �HIGH�.

1 Press [MODE].
You can now select a mode.

1 Press [MODE].
You can now select a mode. 2 1 Within 10 seconds Push [SELECT, ENTER] up or down so �MIC SENSE� flashes. 2 Within 10 seconds Press [SELECT, ENTER]. 3 1 Within 10 seconds Push [SELECT, ENTER] up or down so �SENS >H?� flashes. 2 Within 10 seconds Press [SELECT, ENTER]. �SENS=HIGH SET� is displayed.

2 1 Within 10 seconds
Push [SELECT, ENTER] up or down so �VAS SET� flashes. 2 Within 10 seconds Press [SELECT, ENTER].

ªConnecting external microphone Connect the microphone to the [MIC (PLUG IN POWER)] jack. The built-in microphone is turned off. Plug type: 3.5 mm (1/8 in.) monaural ªWhen a �NO MORE...� display appears There are nine folders, there are 99 files in the folder, or the card is out of memory. Delete unneeded folders, and files or use another card.
RQT5626

3 1 Within 10 seconds
Push [SELECT, ENTER] up or down to select �VAS>ON?�. 2 Within 10 seconds
RQT5626 Basic operations

Press [SELECT, ENTER]. �VAS=ON SET� is displayed and �

� lights.

12

ªTo turn VAS off > Select �VAS OFF?� in step 3 and press [SELECT, ENTER]. Turn VAS off when making important recordings. 13

MODE