When the terminal is pushed into the receptacle as far as it will go, the surface unit will fit into the reflector bowl.
3.
Hold the surface unit as level as possible with the terminal just started into the receptacle.
Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer. If a reflector bowl gets discolored, some of the utensils used may not be flat enough. Or some may be too large for the surface unit. In either case, some of the heat that is meant to go into or around a utensil goes down and heats the reflector bowl. This extra heat can discolor it.
4.
While pushing the surface unit terminal into the receptacle, lift a little on the edge of the unit nearest the receptacle.
_-__..CART
W&FACE
CLEANING COOKTOP MODULES
-___UNITS
WHAT TO USE
Do not clean water
HOW TO CLEAN
l l l l l
l RIDDLE MODULE -~--Warm soapy
__-__
____.-
--..--.
Grill Warm soapy water or soapy steel wool pad Heating Element Do not clean Basket with Ceramic Ilot soapy water Rocks
-
l
Sol1 burns otf. Do not Immerse. Do not Immerse griddle. Wash, rinse and ary well. Do not use metal scouring cleansers Use plastic scouring pad Wash, rinse and dry well. Use soapy steel wool pads Soil burns off.
pads
or harsh __~ areas
if needed.
ORILL MODULE
l l l l l l l
for stubborn
Do not immerse
Clean often. Soak and swish In hot, soapy Replace as needed (contact water. dealer).
Grease Well and Frame Warm soapy water and plastic scouring pad Warm soapy water and plastic scouring pad Motor v;;ec!oth; warm soapy .___~
l Wash, rinse and dry well. 0 Clean often.
l l l l l
Wash, rinse and dry well. Clean after each use. Do not immerse. Unplug before cleaning. Wipe clean often.
