C-Tec Smart Sheet
R800-7070 Radial Tonebone Bassbone
Today, most bassists have two basses: one traditional Fender style passive and a 5 or 6 string active. These have very different levels and sounds. As part of the Radial Tonebone family, the Bassbone is a unique bass guitar signal manager that allows the bassist to switch between two basses without having to re-adjust the tone and volume of the amplifier. This is accomplished with two channels and a powerful EQ that can override the bass amp�s tone settings. The Bassbone can also be used with one bass, creating the impression of two distinct instruments by simply switching the channels. Also included is a power-booster with variable gain and an effect loop. These can be used individually or together such as introducing a flanger with a boost for soloing. A post-Bassbone balanced output sends the bass signal to the mixer with all settings (level, EQ, effect loop). This eliminates the need to carry a bass amplifier to small coffeehouse gigs. There is even a bass-friendly tuner out!
Power-boost level control for +8dB of extra kick when soloing. Military grade PC board with unique full surface ground-plane for low noise Special 15VDC power supply for extra headroom to handle bass signals Separate high gain tuner-friendly output is EQ�d to make tuning easy. Effect loop TRS jack inserts pedals into the signal chain when needed Bassbone�s bass guitar output sends signal to your bass amplifier Solid 14 gauge steel construction for years of trouble free performance Boost foot switch activates boost circuit and/or the effect loop. Big LED !
Channel-2 has a powerful 3-band EQ that can override the amp�s EQ
Channel-2 level control sets bass #2 or channel-2 output volume.
Channel-1 level control sets bass #1 or channel-1 output volume
Ground lift for the XLR pin-1 helps eliminate noisy ground loops. XLR balanced post effect DI box output drives signal to mixer Large, easy to see bright LEDs give you instant channel status. Input-2 for your second bass. Signal is controlled by channel-2 Input-1 for your main bass. When using one bass, goes to both channels Heavy duty custom made foot switch for trouble-free performance. Boost footswitch assign lets you select between boost, effect or both. Channel-1 countour gives you choice of flat, and two great pre-set EQ curves Toggle foot switch selects between channels 1 or 2. Big easy to see LEDs
Applications
Controls two basses with one amplifier Makes one bass sound like two basses Replaces the bass amplifier for small gigs Works like a direct box for the mixer Works like a power booster & loop controller
Using the Bassbone with 2 bases
CHANNEL-1 BASS-1 LEVEL 3-BAND EQ TOGGLE BASS AMP MIXER
CHANNEL-2 BASS-2 LEVEL CONTOUR
Cool factors
Makes switching 2 basses easy & fast Give you control over the bass signal path Powerful EQ for wide tonal spectrum Separate tuner out is always on Effect loop keeps noisy pedals out of signal path Eliminates need for bass amp at small gigs
Using the Bassbone with 1 bass
CHANNEL-1 LEVEL BASS 3-BAND EQ TOGGLE BASS AMP MIXER
CHANNEL-2 LEVEL CONTOUR
Radial Engineering - Division of J.P. CableTelk Electronics Ltd. · Tel: 604-942-1001 · Fax: 605-942-1010 · email
[email protected]
This document is the property of j.p. CableTek Electronics Ltd. Smart Sheet (C) For authorized dealer use only