CONTRAST
This adjusts the contrast of the picture. (Adjust the �BRIGHT� setting first if required before adjusting the �CONTRAST� setting.) The picture is bright: I button The picture is dark: H button
White balance R/G/B (W-BAL R/G/B)
(RGB only) This is used to adjust the white areas of the picture if they appear colourised. To make the selected color lighter: I button To make the selected color stronger: H button
BRIGHT
This adjusts the darker areas (black areas) in the picture. Black areas are too light: I button Dark areas are too solid: H button
AI
ON The lamp is controlled according to the input signals to project images with the best quality. OFF �AI� is disabled. NOTE: B �AI� is disabled when �LAMP POWER� is set to �LOW�. (Refer to page 45.)
COLOR
(S-VIDEO/VIDEO/YPBPR only) The color is too deep: I button The color is too pale: H button
TINT
(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. The flesh tones are greenish: I button The flesh tones are reddish: H button
SHARPNESS
To soften the picture details: I button To sharpen the picture details: H button
COLOR TEMP.
COLOR TEMP. STANDARD
[
HIGH
[
LOW
This is used to adjust the white areas of the picture if they appear bluish or reddish.
