JVC MXGB5
Manual de Servicio

3.2

CD changer mechanism assembly section

� Prior to performing the following procedures, remove the CD changer mechanism assembly. (See "3.1.2 Removing the CD changer mechanism assembly".) 3.2.1 Removing the tray disc (See Figs.1 and 2) (1) Turn the gear cam on the bottom side of the CD changer mechanism assembly in the direction of the arrow and draw the tray disc toward the front until it stops. (See Figs.1 and 2.) (2) Disconnect the card wire from the connector CW103 on the CD sub board. (See Figs.1 and 2.) (3) Push down the two tray stoppers and pull out the tray disc. (See Fig.2.)

Gear cam Tray disc CD sub board

CW103
Fig.1

Tray stopper

Tray disc

Tray stopper CW103 (on the CD sub board) Fig.2

1-20 (No.MB160)