Getting Started
Step 1: Inserting batteries into the remote control
3 1 2
Step 2: Setting the TV
IMPORTANT! Make sure you have completed all the necessary connections. (See pages 12�13 �Connecting TV�.)
E n g l i s h
1 Press SOURCE control until �DISC�
appears on the display panel (or press DISC on the remote.)
1 Open the battery compartment. 2 Insert two batteries type R06 or AA,
following the indications (+-) inside the compartment.
2 Turn on the TV and set to the correct
3 Close the cover.
Using the remote control to operate the system
1 Aim the remote control
directly at the remote sensor (iR) on the front panel.
PLAY/PAUSE
STOP
PREV
NEXT
2 Select the source you
wish to control by pressing one of the source select buttons on the remote control (for example TV, TUNER.)
video-in channel. You should see the blue DVD background screen on the TV. � Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details. � Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. � Or, the TV remote control may have a button or switch that chooses different video modes. � Or, set the TV to channel 3 or 4 if you are using an RF modulator.
DVD MENU
3 Then select the desired
function (for example ��, S, T).
CAUTION! � Remove batteries if they are exhausted or if the remote is not to be used for a long time. � Do not use old and new or different types of batteries in combination. � Batteries contain chemical substances, so they should be disposed of properly.
