AEG LAVATHERM 57760
Manual de Usuario

Drying

Cleaning the heat exchanger

1

Important! When the HEAT EXCHANGER display illuminates, it is essential to clean the heat exchanger. Otherwise your dryer might suffer damage. In addition energy consumption will be increased if the heat exchanger unit is covered with fluff.

0 Open the door. 0 Press on the two tabs to unlatch and take off the removable plinth.

0 Turn the two securing disks through a quarter turn each outwards.

0 Pull the heat exchanger out of the base by the handle. 0 Clean the heat exchanger, best with a brush or by rinsing with a hand-held shower head. The water removal slits on the rear of the heat exchanger must be free too.

1

Important! Do not use any sharply pointed objects to clean the heat exchanger. They could make it leak. 0 Reinsert and push in and turn each one of the two securing disks through a quarter turn inwards. The words "top � oben � en haut" must be at the top. 0 Re-mount the plinth. Important! The dryer must not be operated without heat exchanger.

1

Switch off the dryer
0 Turn the programme selector to the OFF position. 21