|
No hay comentarios de productos.
BASIC OPERATIONS
KD-SX927R
1
3
2
Turning on the power
3
Adjust the volume.
To increase the volume. To decrease the volume.
1
Turn on the power.
�HELLO� appears on the display.
Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
Volume or audio level indicator (see page 27) Volume level appears
2
Select the source.
To select the tuner, press FM AM DAB repeatedly.
FM1 AM
FM2 FM3
4
Adjust the sound as you want. (See pages 22 � 24.)
To select CD, CD changer (or �LINE IN�*), press CD CD-CH (AUX) repeatedly.
CD CD-CH (CD changer) (or LINE IN)*
* If �LINE IN� does not appear on the display (see page 28), set the �EXT IN� setting to �LINE IN.� To select �AUX IN� (component connected to the AUX IN jack on the control panel), press and hold CD CD-CH (AUX).
To drop the volume in a moment
Press briefly while listening to any source. �ATT� starts flashing on the display, and the volume level will drop in a moment. To resume the previous volume level, press the button briefly again. � If you turn the control dial, you can also restore the sound.
To turn off the power
Press for more than one second. �SEE YOU� appears, then the unit turns off. � If you turn off the power while listening to a disc, CD play will start from where playback has been stopped previously next time you turn on the power.
Note: When you use this unit for the first time, set the built-in clock correctly, see page 25.
7
ENGLISH
|
