Su carrito de compras está vacío
|
Productos
|
Información
|
Destacado
|
|
No hay comentarios de productos.
KD-SX927R
Removing the turn table / spindle motor (See Fig.37 and 38)
Prior to performing the following procedure, remove the top cover, the connector assembly and the chassis / clamper assembly. 1. Remove the two screws K attaching the spindle motor assembly through the slot of the turn table on top of the body. 2. Unsolder the wire on the connector board if necessary.
K
Turn table
Fig.37
K
Turn table
Spindle motor
Fig.38
1-18
|
|
 |
> |
|
|
Parse Time: 0.195 - Number of Queries: 102 - Query Time: 0.043