JVC KD-SX60WTJ
Manual de Usuario

ENGLISH

Adjusting the sound
You can adjust the sound characteristics to your preference.

2

Adjust the setting.
To increase the level or turn on the loudness To decrease the level or turn off the loudness

1

Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:

Tone level indicator changes as you adjust the bass or treble.

BAS
(bass) (volume)
Indication BAS*1

TRE
(treble) (loudness)
To do:

FAD
(fader) (balance)
Range �06 (min.) | +06 (max.) Ex. 2: When you turn on the loudness

VOL

LOUD

BAL

Ex. 1: When you adjust �TRE� (treble)

Adjust the bass.

TRE*1

Adjust the treble.

�06 (min.) | +06 (max.)

3

Repeat steps 1 and 2 to adjust the other items.

FAD*2

Adjust the front and rear speaker balance. Adjust the left and right speaker balance. Boost low and high

R06 (Rear only) | F06 (Front only) L06 (Left only) | R06 (Right only)

BAL

To reset each sound mode to the factory settings, repeat the same procedure and reassign the preset values listed in the table on page 13.

LOUD*1

frequencies to LOUD ON produce a well| balanced sound LOUD OFF at low volume level. VOL*3 Adjust the volume. 00 (min.) | 50 (max.) *1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including �USER.� *2 If you are using a two-speaker system, set the fader level to �00.� * Normally the control dial works as the volume
3

control. So you do not have to select �VOL� to adjust the volume level.

14