� When �CEQ LINK� is set to �LINK ON� The selected sound mode can be stored in memory for the current source. Each time you change to the same source, the same sound mode is also recalled and shown on the display. The CEQ indicator also flashes. � When �CEQ LINK� is set to �LINK OFF� The selected sound mode effect applies to any source.
4
Select the items you want to adjust.
SEL
ENGLISH
� See page 22 for details.
S
5
Adjust the level.
To increase the level.
Storing your own sound adjustments
DIRECTORY
To decrease the level.
You can adjust the sound modes to your preference and store your own adjustments in memory. � There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
CEQ
MO
ST
RPT
RND
AF REG TP PTY
BBE
Equalization pattern changes as you adjust the bass or treble. Ex.: When you adjust �TRE (treble).�
1
Press BAND MODE (M) to make the number buttons work as different function buttons.
BAND MODE
6 7
Repeat steps 4 and 5 to adjust the other items.
� To adjust the BBEII level, see page 22.
M
Repeat the same procedure to store other sound modes.
2
Activate custom equalizer (CEQ).
EQ
1
7
The last selected sound mode is recalled and applied to the current sound.
To reset to the factory settings, repeat the same procedure and reassign the preset values listed in the table on page 23.
CEQ
MO
ST
RPT
RND
AF REG TP PTY
BBE
Ex.: If you have selected �POPS� previously.
3
Select the sound mode you want.
EQ
1
7
Each time you press the button, the sound modes changes as follows:
