Disassembly method
<Main body>
Removing the top chassis (See Fig.1 to 5)
1. Remove the two screws A attaching the bottom cover to the top chassis on the bottom of the body. 2. Remove the two screws B attaching the top chassis on both sides of the body. 3. Remove the two screws C and the two screw D attaching the heat sink on the left side of the body. 4. Remove the two screws E and the screw F on the back of the body. 5. Remove the two screws G on the upper side of the body. 6. Move the top chassis upward and disconnect the CD mechanism connector from the main board connector by pulling it. Remove the top chassis from the body. Fig.2
