3.1.4 Removing the side panel (See Fig.4) Reference: Remove the front panel assembly as required. (1) Remove the screw B and two screws C attaching the side panel on the left side of the main body. (2) Remove the side panel from the main body.
C
B
C
Side panel
Fig.4 3.1.5 Removing the rear bracket (See Fig.5) � Remove the bottom cover. (1) Remove the three screws D, three screws E and two screws F attaching the rear bracket on the back side of the main body. (2) Remove the rear bracket. 3.1.6 Removing the main board (See Figs.5 and 6) � Remove the front panel assembly, bottom cover and side panel. Reference: Remove the front chassis assembly as required. (1) Remove the three screws D attaching the rear bracket on the back side of the main body. (See Fig.5.) (2) Remove the two screws G attaching the main board. (See Fig.6.) (3) Disconnect the connector CN501 on the main board from the main body and take out the main board with the rear bracket. (See Fig.6.) Reference: Remove the rear bracket from the main body as required. (See "3.1.5 Removing the rear bracket".)
