1. Remove the LEAD CONNECTOR of the A/C HEAD UNIT shown in Fig. 2-8. 2. Remove the two screws (a) fastening the A/C HEAD UNIT shown in Fig. 2-8 to remove the A/C HEAD UNIT.
Head
(Installation)
1. Install the A/C HEAD UNIT shown in Fig. 2-8. Note : Never touch the head of the A/C HEAD UNIT shown in Fig. 2-8. Clean dirt on the head with alcohol, if necessary. 2. Install the LEAD CONNECTOR of the A/C HEAD UNIT shown in Fig. 2-8. 3. Perform �3-3. A/C HEAD Adjustment� and �3-4. Phase Adjustment� of �3. Interchangeability Adjustment of the Mechanism.�
Fig. 2-8
2-9. F/E HEAD
DECK POSITION : Normal
F/E HEAD
(Removal)
1. Lift the F/E HEAD shown in Fig. 2-9-1 in the direction shown by arrow A to remove it. Note : Be sure to replace the removed F/E HEAD with a new one.
A Counterclockwise
(Installation)
1. Install the F/E HEAD shown in Fig. 2-9-1. Note : Never touch the head shown in Fig. 2-9-2. Clean it with alcohol, if necessary.
