Low voltage version.
� Item 20 In the dust chamber a hole with a diam. of 6 mm must be drilled, to cool the cord winder via the cord winder cooling hose, (position the hole as is in the dust chamber to be replaced). � Item 21 In the reel half spring unit a rib must be removed to connect the cooling hose, just as in the replaced unit.
8901 HR 8903
� 4822 530 21034 Cord winder cooling hose (The correct lenght of the tube without connectors is 84 mm). � Item 55 4822 361 10913 Motor 100 - 110 V with warning sign. (Motor metal parts are under live if switched on).
