To ADD/DELETE channels/Noise elimination
To ADD/DELETE channels
You can add the channels you want or delete the channels you do not want manually. Preparation: � Turn ON the TV and set it to the video input mode. � Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)
1 Repeat the step 1 on page 21.
Then press or to select the �ADD/DELETE� option and press ENTER.
CH SETUP TV CATV AUTO CH MEMORY ADD/DELETE
á+/�/ENTER/MENU ñ
2 To Add or Delete desired channels
1
Press Number keys or / to select a channel number you want to add or delete.
ADD CH 003
2
To add channels Press ENTER until �ADD� appears on the screen to set to add the unmemorized channel.
á+/�/0-9/ENTER/MENU ñ
To delete channels Press ENTER until �DELETE� appears on the screen to set to delete the channel from memory. The channel number will blink.
3
Repeat 1 to 2 to add or delete other channel.
3 Press SET UP MENU until the menu screen is cleared.
Noise elimination
When you don't want to receive a weak signal broadcast, the Blue back screen can be obtained by selecting the NO NOISE BACKGROUND "ON". When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to the "ON".
1 Repeat the steps 1~2 on page 20 and press
�NO NOISE BACKGROUND�.
or
to select
2 Press ENTER to select the �ON�
position.
SYSTEM SETUP CLOCK SET LANGUAGE/IDIOMA/LANGUE NO NOISE BACKGROUND ON OFF AUTO CLOCK ON OFF STANDARD TIME DAYLIGHT SAVING TIME
á+/�/ENTER/MENUñ
3 Press SET UP MENU until the menu screen is cleared.
22