TIMER RECORDING
®
With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.
SHOWVIEW Timer Programming
Before performing the SHOWVIEW Timer Programming:
� Make sure that the recorder�s built-in clock is set properly. � Insert a cassette with the safety tab in place. The recorder will come on automatically. � Turn on the TV and select the video channel (or AV mode).
Press PROG.
A Access the SHOWVIEW screen.
B Enter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of a programme you wish to record.
� If you make a mistake, press & and input the correct number.
C Access the SHOWVIEW Program screen.
Press OK, then the SHOWVIEW Program screen appears (if you�re just starting out, �P1� appears).
IMPORTANT
Make sure the channel position number you wish to record is displayed; if not, see �SHOWVIEW System Setup� on page 49
®
and set the Guide Program number correctly. � If the number you entered is invalid, �ERROR� appears on the TV screen. Press & and input a valid SHOWVIEW number. � If the �GUIDE PROG SET� screen appears, see �ATTENTION� on page 23.
