JVC HR-A47U
Manual de Usuario

EN

11

Setting clock semiautomatically
� Semiauto Clock Set
You can change the host channel/D.S.T. /time zone setting manually. First follow steps 1 to 3 on page 10, then go to the following steps.

6 Select D.S.T. mode

You have three choices: AUTO� Select if you want to adjust your VCR�s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*) ON� Adjustment will be made by the clock itself. OFF� Select when Daylight Saving Time does not apply to you. On the front panel: Press OK to move the highlight bar to �D.S.T.�, then press CH5� repeatedly until the desired setting is selected.

4 Set Auto Clock to ON
On the front panel: Press OK to move the highlight bar to �AUTO CLOCK�, then press CH5� so that �ON� is selected.
CLOCK SET TIME DATE YEAR 1:00PM 12/24 00 SUN AUTO CLOCK : ON HOST CH : AUTO (CATV) D.S.T. : AUTO TIME ZONE : AUTO PRESS (5,�), THEN (OK) PRESS (MENU) TO END

On the Remote: Press SHUTTLE PLUS 3 to move the highlight bar to �AUTO CLOCK�, then press SHUTTLE PLUS 5� so that �ON� is selected. Then; To select the host channel � go to step 5. To select the D.S.T. mode � go to step 6. To select the time zone � go to step 7.

On the Remote: Press SHUTTLE PLUS 3 to move the highlight bar to �D.S.T.�, then press SHUTTLE PLUS 5� repeatedly until the desired setting is selected.

7 Select time zone
manually.

You can select the time zone automatically or On the front panel: Press OK to move the highlight bar to �TIME ZONE�, then press CH5� repeatedly until �AUTO� or the desired time zone is selected. Each time you press the button, the time zone

NOTE:
The time that has been set previously will be erased when �AUTO CLOCK�, �HOST CH�, �D.S.T.� or �TIME ZONE� setting is changed.

5

You can either select �AUTO� or enter a PBS

Select host channel
channel number.

On the front panel: Press OK to move the highlight bar to �HOST CH�, then press CH5� repeatedly until �AUTO� or the desired PBS channel number is selected. On the Remote: Press SHUTTLE PLUS 3 to move the highlight bar to �HOST CH�, then press SHUTTLE PLUS 5� until �AUTO� or the desired PBS channel number is selected.

= AUTO= ATLANTIC= EASTERN = CENTRAL = MOUNTAIN = PACIFIC = ALASKA = HAWAII = (back to the beginning) On the Remote: Press SHUTTLE PLUS 3 to move the highlight bar to �TIME ZONE�, press SHUTTLE PLUS 5� repeatedly until �AUTO� or the desired time zone is selected (see above).

changes as follows:

NOTE:
If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected "AUTO" for the host channel in step 5, be sure to select the correct time zone manually.

NOTE:
Some PBS channels do not transmit clock setting data.

8 Return to normal screen
* Auto Daylight Saving Time
This function enables automatic adjustment of the VCR�s clock at the start and end of Daylight Saving Time. With Auto DST activated, . . . ... on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM. ... on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

Press MENU.

IMPORTANT
Turn off the VCR after performing Semiauto Clock Set. �Auto� will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.