PHILIPS FWM589/21T
Manual de Usuario

Disc Operations
IMPORTANT! � This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the changer mechanism. � Do not load more than one disc onto each tray.

Basic playback controls
Load discs (page 3 - P4).
To play all discs on the disc trays � Press � . � OR In stop mode, press CD to select a disc tray to begin, then press � . � � All the available discs will play once, then stop. To play the selected disc only � Press one of the CD 1~5 buttons on remote. � The selected disc will play once, then stop. To select a desired track � Press í or ë repeatedly until the desired track is displayed. � During random play (shuffle), pressing í will not affect the current playback. To search for a particular passage during playback � Press and hold à or á and release it when the desired passage is located. � During searching, the volume will be reduced. For MP3 disc, the volume will be muted. To change discs without interrupting playback � Press OPEN�CLOSE 0 of respective disc trays (refer to �Loading discs�). For example, if currently disc tray 1 is playing, you can change the discs on disc trays 2~5. To interrupt playback � Press � . � � To resume normal playback, repeat the above. To stop playback � Press �. � If the system remains in stop mode for 30 minutes, it will switch to Eco Power standby mode.

Playable discs
This system is able to play: � All pre-recorded audio CDs � All finalised audio CDR and audio CDRW discs � MP3-CDs (CD-ROMs with MP3 tracks)

Loading discs (page 3 - P4) 1 Press OPEN�CLOSE 0 DISC 1 on top of
the main unit to open disc tray 1.

2 Load a disc with the label side facing up. For
double-sided discs, load the side you want to play facing up.

3 Press OPEN�CLOSE 0 DISC 1 again to
close the disc tray. � �READING� is displayed. The selected disc tray, total number of tracks and the playing time will appear on the display.

4 Repeat steps 1~3 for loading discs into the disc
trays 2~5 by pressing the corresponding OPEN�CLOSE 0 DISC button. Notes: � To ensure good system performance, wait until the disc trays completely read the disc(s) before proceeding. � Only one tray can be opened each time. If you open the second tray before closing the first tray, the first tray will automatically close before the second tray opens.

19

English