Before starting the wall installation, be sure to remove the front panel and filter frame.
3
Install the unit on the wall.
Front Panel
Filter Frame
1 Place the unit facing up, remove the Front
2
Air Outlet
Panel and Filter Frame.
1
2 Adjust the length of the power cord.
1 2
Measure the distance between the unit and the wall outlet. (Refer to E-6) Place the unit face down, and insert the power cord into the power cord adjusting guide so as to adjust it to the measured length.
Power Cord Adjusting Guide
Do not wire the power cord right below the wall mounting bracket.
In case the power plug to be lead to the right of the unit.
Power cord adjusting guide
In case the power plug to be lead to the left of the unit.
Cautions
� To avoid scratching or damaging the unit, place it on a soft piece of cloth until it is installed on the wall. � Do not lead the power cord together with other cord and do not twist it. � Never modify the power cord. � Take care not to damage the power cord.
