JVC FS-H30
Manual de Usuario

Disc Direct Recording
Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you have set in Program Play. On the unit ONLY:

To record on both sides�Reverse Mode
On the remote control ONLY: Press REV.MODE (reverse mode) REV.MODE repeatedly until or is lit. � When using the Reverse Mode for Disc Direct Recording, lights up and start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be rerecorded at the beginning of the reverse side (2). If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape.
When making Sleep Timer settings while doing Disc Direct Recording Set enough time to allow for the disc to finish playing; otherwise, the power will go off before recording is completed.

1 2

Put a recordable cassette in with the exposed part of the tape down. Load a disc.
� If the current playing source is not the CD player, press 3/8 CD, then 7 before going to the next step. � If you do not want pauses of about 4 seconds recorded between selections, press 3/8 CD twice. Otherwise, a non-recorded pause will be automatically inserted between selections. � If you want to record on both sides of a tape, see �To record on both sides�Reverse Mode.�

3

Press ONE TOUCH REC (recording).

ONE TOUCH REC

One Track Recording
This recording method is convenient when you record tracks while playing the disc. You can record just your favorite songs on the tape. On the unit ONLY:

The REC (recording) indicator lights up on the display and recording starts. After recording, the CD player and cassette deck automatically stop. To stop while recording, press 7. The tape stops after 4 seconds. To remove the cassette, press ) on the unit.

1 2 3

Put a recordable cassette in with the exposed part of the tape down. Play the track on the disc you wish to record. Press ONE TOUCH REC (recording).
ONE TOUCH REC

The CD player returns to the beginning of that track and the track is recorded on the tape. After recording, the CD player and cassette deck automatically stop.

4

Repeat steps 2 and 3 to record other tracks you want.

To stop while recording, press 7. The tape stops after 4 seconds. To remove the cassette, press ) on the unit.

19