WHIRLPOOL ET20ZKXBN00
Manual de Usuario

Installing

it properly

1. Allow 1/2inch (1.25 cm) space on each

side and at the top of the refrigerator for ease of installation. 2. If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider. 3. The refrigerator can be flush against the back wall.

Leveling

it
Right to raise;

Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below. 1. Remove base grille. (See page 12.) 2. To raise front, turn screw clockwise. 3. To lower front, turn screw counterclockwise. 4. Check with level. 5. Replace base grille. (See page 12.)

left to lower
screwdriver

6