Use of the fridge
Flaskhållare
Placera flaskorna (med öppningen framåt) på den iordningställda hyllan. Om hyllan är horisontalt placerad skall man endast ställa stängda flaskor på den. Denna flaskhylla kan lutas vilket gör det möjligt att lagra redan öppnade flaskor. För att luta hyllan skall man dra upp hyllan så att den sedan kan roteras uppåt och placeras på den ovanliggande nivån.
Control Panel
AB C
A B C D E F G On/OFF light
D
EFG
Fridge button ON/OFF Temperature setting button (warmest) Temperature indicator Temperature setting button (coldest) Super cooling light Super cooling button
D. Temperature indicator
During normal functioning the indicator shows the temperature inside the fridge. Attention! Difference between the temperature displayed and temperature setting is normal. Especially when: - a new setting has recently been selected - the door has been left open for a long time warm food has been placed in the compartment
Press (I) for the functioning of the whole appliance . Press (B) can function the fridge compartment separately with the appliance in function.
F. Super cooling pilot light G. Super cooling button
The maximum performance is obtained by setting the supercooling function. It�s recommended when loading large quantities of food. Press the supercooling button (G).The relevant pilot light (F) switches on. The internal temperature goes down to +2°C. After about 6 hours the supercooling function switches off automatically.
A. Light ON/OFF Luftcirkulation
Kylskåpet är utrustat med en speciell D.A.C. fläkt (Dynamic Air Cooling) som aktiveras när man slår på strömbrytaren (se fig. 1), och när den gröna indikatorlampan är tänd betyder detta att fläkten är i funktion. Vi rekommenderar att man använder fläktens (D.A.C.) funktion när rumstemperaturen överskrider 25° C.
BRYTARE
Fig. 1
B. Button ON/OFF
ON: Press the button (B). The pilot light (A) switches on. OFF: Keep press the button (B) until the pilot light (A) and the temperautre indicator switched off.
C - E. Temperature setting buttons
The temperature can be adjusted between +2°C and +8°C. By pressing the button (C or E), the current temperature setting flashes on the indicator. It is possible to modify the setting temperature only with flashed indicator. To set a warmer temperature, press button (C). To set a colder temperature, press button (E). The indicator display the newly selected temperature for a few seconds and then shows again the inside compartment temperature. The newly selected-temperature must be reached after 24 hours. Attention! During the stability period by the first starting the temperature displayed can not correspond to the setting temperature. During this time it is possible that the temperature displayed is lower than the setting temperature.
Operation
Insert the plug in the power socket. Press (I) for the functioning of the whole appliance . Press (B) can function the fridge compartment separately but only with the appliance in function. The fridge is pre-set to run at +5°C. This temperature will be reached in a few hours. As soon as the appliance is switched on the temperature indicator (D) shows the current temperaure inside the fridge.
