PHILIPS FW-C280/34
Manual de Usuario

Clock/Timer
3
Press à or á on the system to set the hour for the timer to start. 4 Press í or ë on the system to set the minute for the timer to start. 5 Press CLOCK�TIMER to store the start time. � The timer is now set. � The TIMER remains on the display. ¶ At the preset time, the timer will be activated. � The selected source will be played. Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is CD, playback will begin with the first track of the selected disc or programme. If the disc trays are empty, the TUNER will be selected instead. � The timer will not activate if a recording is in progress. To switch off the TIMER Press and hold CLOCK�TIMER for more than 2 seconds. Press � on the system to cancel the timer. � The timer is now switched off. � The display will show "OFF" and the TIMER disappears. To start the TIMER again (for the same preset time and source) Press and hold CLOCK�TIMER for more than 2 seconds. Press CLOCK�TIMER again to store the start time. � The timer is now on. � The TIMER appears on the display.

Sleep Timer (only on remote control)
This feature allows you to select a length of time after which the system will switch to the standby mode automatically.

1

2

Press SLEEP on the remote control repeatedly to select a period of time. � The selections are as follows (time in minutes): 15 � 30 � 45 � 60 � OFF � 15 � � "SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes. When you reach the desired length of time, stop pressing the SLEEP button. � The SLEEP display lights up. � The Sleep Timer is now set. Before the system switches to standby mode, a countdown of 10 seconds will be displayed. "SLEEP 10" � "SLEEP 9".... � "SLEEP 1" � "SLEEP"

1 2

While SLEEP mode is activated ¶ Press SLEEP once to view the remaining length of time. ¶ Press SLEEP twice to change the pre-selected period of time. � The display will show the remaining time followed by the sequence of sleep timer options. To switch off the Sleep Timer ¶ Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY-ON button.

1 2

25
pg 01-28/C280/22-Eng 25 12/7/00, 2:48 PM

3139 115 20711

English