INTEGRA DTR7.1 RS232
Manual de Servicio

ONKYO RS232 Control System

2.Communication Flow Description
The TX-DS787/DTR-7.1 uses Question, Command and Notification messages to have communicate with a given HOST. This protocol is designed for point to point communication between a HOST and the TX-DS787/DTR-7.1.

Question Message
Send a "Question Message" to the TX-DS787/DTR-7.1 from the HOST to get the current system status. The TX-DS787/DTR-7.1 will respond with a status message.

TX-DS787 DTR-7.1

Question Message "!1SLIQSTN[CR]" Status Message "!1SLI03[EOF]"

HOST/Controller

Command Message
Send a "Command Message" to the TX-DS787/DTR-7.1 from the HOST to change the system status. The TX-DS787/DTR-7.1 will respond with a status message within 50msec. If TX-DS787/DTR-7.1 does not respond within 50msec, the communication has failed.

TX-DS787 DTR-7.1

Command Message "!1SLI03[CR]" HOST/Controller Status Message "!1SLI03[EOF]"

Notification
If user change the system status, the TX-DS787/DTR-7.1 will notify the HOST by sending the new current status.

TX-DS787 DTR-7.1

Status Message "!1SLI03[EOF]"

HOST/Controller

-4-