�A. Drive pulley side
Adjust the "�" of the character belt to the position of the hole (mark). ("�" shown in the above arrangement of characters)
Cutout
4-2. Tightening torgue value
1) Key PWB : 1.5 0.2kg
Driven pulley
UPPER CASE
1 7
2 5 6
4
3
�B. Driven pulley side
Hole(mark)
UPPER CASE
Adjust the center of the space of the character belt to the position of hole (mark).
1
4. Note for disassembly and assembly
4-1. Disassembly of upper / lower cabinets
1) Hold the bottom housing and push down the upper housing at circled 1 and slide the upper housing outwards. 2) Do the same at circled 2 and then 3.
1 2