KENWOOD DVR7000
Manual de Servicio

DVR-7000

4.2 MAIN ASSY ADJUSTMENT
Note : Use disc : [ PAL DVD test disc ] No.
1

It is recommended to adjust using PAL Disc. Adjustment Value
27.000000MHZ ± 130Hz

Adjustment Name
Master clock free-running adjustment (Clock system adjustment)

Adj. Point Measurement Point
VC3001 MAIN ASSY IC4007 Pin54 (CLKO) (M65774AFP) Y output of S terminal (75� termination)

Adjustment State
No input signal or during test disc playback Playback the PAL DVD test disc(100% color-bar). Terminate the Y output of S terminal with 75� and adjust so that the level of between sync tip and white peak becomes 1.0Vp-p. Playback the PAL DVD test disc(100%colorbar). Terminate the C output of S terminal with 75� and adjust so that the amplitude of color burst becomes 300mVp-p. Playback the PAL DVD test disc(100% color-bar). At the pin 11 of CN7001 in the MAIN ASSY, adjust so that the level of between sync tip and white peak becomes 760mVp-p. Playback the PAL DVD test disc(100%colorbar). At the pin 13 of CN7001 in the MAIN ASSY, adjust so that the level of between bottom and top becomes 520mVp-p in the 100% color-bar screen. Playback the PAL DVD test disc(100%colorbar). At the pin 15 of CN7001 in the MAIN ASSY, adjust so that the level of between bottom and top becomes 520mVp-p in the 100% color-bar screen.

2

Y level adjustment of CVBS system (Output system adjustment)

VR7002

1.0Vp-p ± 40mV

3

C level adjustment of CVBS system (Output system adjustment)

VR7001

C output of S terminal (75� termination)

300mVp-p ± 12mV

4

Y level adjustment of component system (Output system adjustment)

VR7003

MAIN ASSY CN7001 Pin11 (Y(G) Out)

760mVp-p ± 22mV

5

PB level adjustment of component system (Output system adjustment)

VR7004

MAIN ASSY CN7001 Pin13 (PB(B) Out)

520mVp-p ± 15mV

6

PR level adjustment of component system (Output system adjustment)

VR7005

MAIN ASSY CN7001 Pin15 (PR(R) Out)

520mVp-p ± 15mV

When NTSC test disc GGV1025 is used, the adjustment No.2 to No.6 value is changed to the following value. No.
2

Adjustment Name
Y level adjustment of CVBS system (Output system adjustment)

Adj. Point Measurement Point
VR7002 Y output of S terminal (75� termination)

Adjustment Value
980mVp-p ± 39mV

Adjustment State
Playback the NTSC DVD test disc (75% color-bar). Terminate the Y output of S terminal with 75� and adjust so that the level of between sync tip and white peak becomes 980mVp-p.

3

C level adjustment of CVBS system (Output system adjustment)

VR7001

C output of S terminal (75� termination)

280mVp-p ± 11mV

Playback the NTSC DVD test disc(75%colorbar).Terminate the C output of S terminal with 75� and adjust so that the amplitude of color burst becomes 280mVp-p. Playback the NTSC DVD test disc (75% color-bar). At the pin 11 of CN7001 in the MAIN ASSY, adjust so that the level of between sync tip and white peak becomes 745mVp-p. Playback the NTSC DVD test disc(75%colorbar). At the pin 13 of CN7001 in the MAIN ASSY, adjust so that the level of between bottom and top becomes 390mVp-p in the 75% color-bar screen. Playback the NTSC DVD test disc (75% color- bar). At the pin 15 of CN7001 in the MAIN ASSY, adjust so that the level of between bottom and top becomes 390mVp-p in the 75% color-bar screen.

4

Y level adjustment of component system (Output system adjustment)

VR7003

MAIN ASSY CN7001 Pin11 (Y(G) Out)

745mVp-p ± 22mV

5

PB level adjustment of component system (Output system adjustment)

VR7004

MAIN ASSY CN7001 Pin13 (PB(B) Out)

390mVp-p ± 12mV

6

PR level adjustment of component system (Output system adjustment)

VR7005

MAIN ASSY CN7001 Pin15 (PR(R) Out)

390mVp-p ± 12mV

Note : Do the MAIN ASSY adjustment first, before TUMJ ASSY adjustment. When using 75% color bar, adjust making PB/PR output to 75%.

45