About timer recording
Use the timer recording to automatically start and stop a recording at a later date/ time. This recorder will tune to the right programme channel and begin recording at the specified time. With this recorder, you can schedule up to 25 recordings at a time and up to 6 (six) hours for each recording. During timer recording, changing the recorder�s channel is not possible.
Note: If the scheduled timer recording is longer than 6 (six) hours, it will split into two or more titles.
Timer recording (GUIDE Plus+ system)
To schedule a recording with the GUIDE Plus+ system, simply select the desired programme from the channel list.
A Turn on the TV to the correct
programme number for the recorder (e.g. �EXT�, �0�, �AV�). on the remote control. The GUIDE Plus+ screen appears.
B Turn on the recorder and press GUIDE
There are three ways to programme a timer recording � Using the GUIDE Plus+ system � Using the ShowView / VIDEO Plus+ system � Using manual timer recording Note: If the GUIDE Plus+ setup menu appears, it means that this recorder has not been installed with the GUIDE Plus+ programme data yet. See pages 28~29 to set-up the GUIDE Plus+ system.
C Use
keys to select a desired TV channel and use keys to select a programme. Press CH +/- to scroll down/up a page at a time. Press to go directly to a day before or the next day TV listings.
About �VPS/PDC� �VPS� (Video Programming System) or �PDC� (Programme Delivery Control) is used to control the start and duration of TV channel recordings. If a TV programme starts earlier or ends later than was scheduled, this recorder will then turn on and off at the correct time.
D Press the Red button on the remote
control for . E Press GUIDE to exit the menu.
TIPS: Setting an appropriate recording mode is important as it determines the picture quality and recording time to the HDD or a recordable DVD, see page 38.