Step 3: Installation and Setup
Before you start ... When you complete the connections and turn on the recorder for the first time, you should see the initial setup menu appears on the TV. Follow the instructions on the TV to complete the installation.
Welcome
Before using the recorder, please complete the initial installation.
Initial recorder setup
The initial setup menu will appear on the TV when you first power up the recorder. These settings will help you to set up the basic recorder features easily, including TV program installation and clock settings.
Welcome
Before using the recorder,
OK
Next Page
please complete the initial installation.
Otherwise, see the chapter �System menu options� to make several basic settings: Menu language, Auto Install and Clock Setting. This will optimize the performance of this recorder.
OK
Next Page
A Press OK on the remote control to
continue.
B Use
keys to select the tuner mode.
Tuner Mode
Select current tuner mode.
Antenna Cable
Finding the correct viewing channel
A Press STANDBY-ON on the recorder
to turn it on.
OK
Next Page
BACK
Prev Page
B Turn on the TV and set it to the correct
video-in channel. You may go to Channel 1 on your TV, then press the Channel Down button on your TV�s remote control until you see the Video In channel. You may press ° button repeatedly on your TV�s remote control. Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO. See your TV manual for more details.
{ Antenna } Select this if the DVD recorder is connected directly to an indoor or outdoor antenna. { Cable } Select this if the DVD recorder is connected directly to the cable signal or through a set-top box.
TIPS:
Press OK to go to the next setup page. Press BACK to return to the previous setup page.