Use the cursor button (2/3) to adjust the settings.
If a DVD or Video CD is playing, the changes will be visible on the screen as they are adjusted.
LAST MEMORY LAST
CONDITION MEMORY COND.
OPEN/ CLOSE
0
DISPLAY DISP
AUDIO
SUBTITLE
ANGLE
DISPLAY
6
Repeat steps 3 and 4 to make adjustments to other settings.
If you would like to save the settings in the player�s memory, be sure to select either [1] or [2] in the [Memory] save the new settings in. Please note location to setting to establish which memory that if you select a location where settings have already been saved, the old settings will be replaced by the new ones.
1 3, 6, 7
SETUP VNR
MENU
TOP MENU
5
5
ENTER
RETURN
2, 4, 5, 6
NEXT
PREV
STOP
PLAY
7
STEP/SLOW
e
E
1 4 7
PROGRAM
Vol �
2 5 8
REPEAT
Vol + VOLUME
1
DISC
2 DISC
4
5
1 2 3 4
Press VNR. Use the cursor button (�) to select [Video Setup]. Press ENTER. Use the cursor button (5/�) to select the setting to adjust.
DNR Move
The settings rotate in the following order: DNR (Adjust to control the amount of signal noise in the luminance component of the video signal.) Sharpness (Adjust the clarity of the picture.) Gamma (Adjust the brightness of the darker images in the picture.) Chroma Delay (Adjust the delay of the Y (luminance) and C (color) components of the video signal.) Memory (Select a memory location at which to save your settings.)
5
3
REV
4
¢
PAUSE
5
1
8
FWD
¡
CLEAR
3 6 9
A-B
A-B CH �
C
+10
0
SEARCH MODE CH +
CHANNEL RANDOM
3
CD MODE CD TV DVD TV TV FUNC
�
Memory Move
ENTER
Off 1 2 Select DISPLAY Check
7
When you are finished making adjustments, press ENTER to establish the new settings.
To display all of the settings at once
Pressing DISPLAY while the picture quality setting adjustment screen is displayed enables all of the current settings to be viewed on one screen. Adjustments may also be made when this screen is displayed, by moving the cursor button (5/�) to select a setting, and right and left to adjust the selected setting.
