A �@�shows what each cvcle includes MAIN INAL WASH IINSE YASH #INSE IINSE
CYCLE TIME Minutes)
.
.
l tt
l
76.
l
The water heats to 140°F (60%) in the final rinse (marked ++)unless you select Low Energy Rinse.
POTS-N-PANS
et (marked +). The water heats to 140°F (60°C) in the final rinse (marked ++)unless you select Low Energy Rinse.
.
lt
@t-t
.
76*
l
l
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
Using
Cancel/Drain
To clear the indicators:
Press Cancel/Drain before starting the dishwasher to clear all cycle and option selections.
Press Cancel/Drain to cancel a cycle or to clear the indicators.
To cancel
l
a cycle:
l
Press Cancel/Drain while the dishwasher is running to start a 2-minute drain. It will take a few seconds for the drain to start. If desired, select a new cycle. (See �Changing a cycle or an option setting� on page 15.) You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher again before starting a new cycle.
NOTE: A small amount of water remaining in the dishwasher is normal. 14
