PANASONIC DMCFZ15P
Manual de Usuario

Recording pictures (advanced)

� Setting the White Balance manually (White set ) Use this mode when you want to set the white balance manually. 1 Set to [ ] (White Set) and then press 1. 2 Aim the camera at a sheet of white paper or a similar white object so that the frame on the center of the screen turns white and then press 1.
WHITE SET

3 Finely adjust the white balance. � 1 [BLUE]: Press when the hue is reddish. � 2 [RED]: Press when the hue is bluish. About the white balance � When taking a picture with the flash, the white balance will be automatically adjusted [except for [ ] (Daylight) and [ ] (Flash)], but the white balance may not be properly adjusted if the photo flash is insufficient. About the white balance fine adjustment � The white balance icon on the screen turns red or blue. � You can set the value independently for each of the modes in white balance. � The setting on the fine adjustment of the white balance is reflected to the picture when taking a picture with the flash. � When you set the white balance using the White set [ ], the adjustment level is set to �0�. � When the color effect is set to any of [COOL], [WARM], [B/W] or [SEPIA] (P75), you cannot finely adjust the white balance.

SET

CANCEL MENU

� Finely Adjusting the White Balance (White Balance Fine Adjustment ) When you cannot acquire the desired hue by setting the white balance, you can adjust the white balance finely. 1 Set the white balance to [ ]/[ [ ]/[ ]/[ ]. (P68) 2 Press 3 several times until [WB ADJUST.] appears.
WB ADJUST.
RED BLUE

]/

SELECT

EXIT

69