FUNAI DDVR-4800
Manual de Usuario

H9513ED(EN).fm Page 13 Thursday, July 31, 2003 7:02 PM

OTR (One Touch Recording) This function enables you to set the duration of a recording simply by pressing REC on the front panel. 1) Follow steps 1) to 3) in �Viewing and Recording the Same Programme� section (page 12). 2) Press REC on the front panel repeatedly until the desired recording length appears. 0:30 1:00.... 7:30 8:00

Picture Select This function enables you to select the picture quality of a tape. � Use the remote control for this procedure. 1) 2) 3) 4) Press VCR, then MENU. Press K or L to select �SET UP�, then press B. Press K or L to select �PICTURE�. Press B until the desired mode (NORMAL, SOFT, or SHARP) is indicated on the TV screen. Once you select the Picture Select mode, it stays in effect even after you turn off the DVD/VCR.
MENU TIMER SET UP INITIAL MENU TIMER SET UP INITIAL

Normal recording Recording stops when 0:00 is reached. � To check time remaining during an OTR Press DISPLAY. � To change the recording length during an OTR Press REC until the desired length appears. � To stop an OTR before recording is finished Press STOP. � To cancel the OTR but continue recording Press REC repeatedly until �I� appears in the upper left corner of the TV screen. � When OTR is finished, the VCR turns off automatically. To use the VCR again, press T-SET on the remote control, or STOP/EJECT on the front panel. Auto Repeat Playback The DVD/VCR has an auto repeat function that allows you to repeat a tape indefinitely without touching PLAY. � Use the remote control for this procedure. � Insert a pre-recorded tape. 1) 2) 3) 4) Press MENU. Press K or L to select �SET UP�, then press B. Press K or L to select �AUTO REPEAT�. Press B so that �ON� appears next to �AUTO REPEAT� on the TV screen. When in Stop mode, Auto Repeat mode will start automatically. If the on-screen menu still remains, press MENU to exit. Once you select the Auto Repeat mode, it stays in effect even after you turn off the DVD/VCR.

Note:

SET UP AUTO RETURN [AUTO] AUTO REPEAT [ON] PICTURE [NORMAL]

Automatic Operations
Automatic Rewind, Eject

When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After that, the DVD/VCR will eject the tape. � The tape will not auto-rewind during timer recording or One Touch Recording.
Tape Eject

Note:

A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in). � If a timer recording is set, press STOP/EJECT twice to eject a tape. Real Time Tape Counter � This shows the elapsed recording or playback time in hours, minutes, and seconds on screen. (Nothing is shown in the case of blank portion.) � Display on the front panel shows elapsed time in hours and minutes. � The � � � indication will appear when the tape is rewound further than the tape counter position �0:00:00�.

To Stop Playback

Press STOP.
To Exit the Auto Repeat Mode Repeat steps 1) to 3). Then, press B.

�ON� will then disappear from the menu. Press MENU to exit.
MENU TIMER SET UP INITIAL

MENU TIMER SET UP INITIAL

SET UP AUTO RETURN [AUTO] AUTO REPEAT [ON] PICTURE [NORMAL]

13

EN